After this lesson
- Explain what a corner–edge pair is
- Solve the three basic F2L cases intuitively
- Set up and insert a pair from the top layer
The pair
An F2L pair is a corner and the edge that belongs above it. Instead of solving the white corner and then the middle edge, you join them in the top layer and insert them together. The cross and the other solved pairs must remain intact.
The target slot is always between the front and right centres for the standard algorithms. If the pair belongs elsewhere, rotate the cube (y) or use the mirrored version.
The three easy cases
- Connected pair, corner above edge: insert with U R U' R' (right slot).
- Separated pair, corner above its slot: use R U R' to join, then insert.
- Pair already in the slot but wrong: take it out with R U' R', then solve it normally.
U R U' R'
Basic right-slot insertion when the corner is above the edge and the pair is connected.
Look at the pair, not the slot
Beginners watch the slot and try to force the piece in. Stronger solvers watch the pair in the top layer. If the corner and edge are connected, the insertion is usually short. If they are separated, the first job is to join them.
Use U moves to position the pair; avoid rotating the cube for every case. A rotation is not a disaster, but a solve with eight rotations is slow by construction.
Practise one slot
Scramble only the front-right slot and the last layer, then solve that slot ten times. This isolates the pattern. Once the basic insertions are automatic, add the more difficult cases from the 41-case library.
The 41 F2L cases are not 41 algorithms to memorise. Most are variations of joining, splitting and inserting a pair.
Check your understanding
1. What is an F2L pair?
2. Which move is used to insert a connected pair in the right slot?
3. What must stay intact during an F2L insertion?